Design and Performance of a Heated Gas Injector for Producing Cold Molecular Beams
📄 arXiv:2606.18368 · 📥 PDF · 2026-06-16 · physics.atom-ph
Authors: Avneesh Verma [arXiv · scholar] , Jack Mango [arXiv · scholar] , Shungo Fukaya [arXiv · scholar] , Arian Jadbabaie [arXiv · scholar] , Sepehr Ebadi [arXiv · scholar] , Ronald F. Garcia Ruiz [arXiv · scholar] , John M. Doyle [arXiv · scholar]
🕰 Orloj analysis
Tento článek popisuje návrh a výkon ohřívaného plynového injektoru pro produkci studených molekulárních svazků, který dodává teplý plyn do kryogenního prostředí s nízkým tepelným zatížením. Klíčovým prvkem je trubice z polyamid-imidu (PAI), která zajišťuje tepelnou izolaci a kryogenní vakuově těsné utěsnění.
💡 Jde o cenný inženýrský příspěvek, který poskytuje robustní a efektivní experimentální nástroj pro přesná měření v atomové a molekulární fyzice, zejména pro hledání fyziky za Standardním modelem.
✓ falsifiable, modest_claims
⚠ Lack of explicit error bars for heat load and leak rate in abstract, Qualitative description of displacement ('no significant displacement')
📄 Abstract
We realize an injector device that supplies warm gas directly into a cryogenic environment. This injector has several advantageous features, including robustness, rigidity, simple installation, and excellent thermal isolation between a hot ($\sim$300 K) copper fill line and a cold ($<$3 K) cryogenic buffer gas cell. Less than 200 mW heat load on the cell is observed in realistic conditions of a molecular precision measurement experiment. A polyamide-imide (PAI) tube is the essential design feature. The fill line is epoxied to one end of the tube while the other end of the tube is connected to the cell via a slip-fit onto a brass nipple, realizing a complete vacuum-tight seal. PAI contracts on the brass nipple when cooled, forming a cryogenic leak-tight seal. The injector is easily (de-)mountable and rigid, with no significant displacement of the fill line relative to the cell observed during cooldown to 4 K. We characterize injector performance by flowing into the cell $\text{SF}_6$ through the hot fill line and cold $\text{He}$ buffer gas through a separate cryogenic fill line while laser ablating a barium-containing target. This produces cold BaF free radicals, detected using absorption spectroscopy. This injector design will be employed to laser cool radium-containing molecules, such as $\text{RaF}$ and $\text{RaOH}$, where leak-tight delivery of $\text{SF}_6$ and $\text{H}_2\text{O}$ reagents into a cryogenic buffer gas cell is required for scientific and safety reasons. These molecules are of particular interest for the study of symmetry-violating nuclear properties and searches for physics beyond the Standard Model.